• Types of building foundations based on consumables

    Types of building foundations based on consumables

    The foundation of a building, called the foundation or foundation, is the part of the structure that is in contact with the soil and, as a load member, carries the weight of the building to the ground. The foundation stabilizes the structure and prevents it from falling. The connection of a building to the ground is made by the founders and is located between the building and the ground. The foundations are designed and constructed based on the soil properties beneath them and the weight of the structure. Imagining a building without a foundation is impossible because the absence of a foundation leads to a landfall and the structure cracks. The foundations increase building resistance against loads such as the weight of walls, columns, ceilings, wind and earthquakes. They distribute the excess load to the building and transport it to the ground. Pieces are categorized into different types according to the materials consumed and the method of manufacture. In this post by the builder, we first introduce the types of foundations and its reinforcement and then introduce the types of foundations based on consumables.

    What is a foundation?
    The foundation is one of the first and most basic stages of construction whereby the weight of the building is transferred from the pillars used in construction to the ground and surrounding soil. The type and dimensions of the foundation vary according to the type of building used and the amount of forces applied, the type of soil, and the climatic conditions and are divided into three categories: surface foundation, deep foundation, and special foundation. Below we will explain each of them.

    Types of building foundations based on consumables

    Surface foundation
    Surface foundation is one of the most common foundations used in construction. The way this foundation works is generally less than their width. In the implementation of surface foundation, the excavation process is first carried out and the foundation is passed through inappropriate surface layers. If there is a need for underground floor construction, more drilling will be done.

    Deep foundation
    As its name implies, this foundation is executed in deep layers. Surface soils do not have the strength needed to withstand the forces involved. Therefore, the depth of the work must be such that the force is transferred to the hard layers beneath. In general, deep foundation is divided into two categories: thick system and candle foundation system.

    Candle Foundation
    The most common types of deep foundations are candle foundations. The candle is called a tall, columnar structure that is small in diameter and thin. By placing it inside the soil, this structure transfers the weight of the structure to the underside of the soil. The candle foundation itself is divided into three categories: throwing candle, thrown candle and thrown candle.

    Concrete, steel, and wood are used in the construction of the candle-piercing foundation. These piles are pre-made structures that are installed on the site after manufacture. Candle

    In-molding is also known as concrete pile. Implementation of this foundation model is that the pile will create a hole inside the hole to the required depth and then fill the hole with concrete. Such foundations are both accessible and executable. An example of these foundations is that the piles are dug directly. Another example is that the candles must be molded first and then used in the execution. These candles have one or more protrusions and are also known as flat candles.

    The third category of candle foundations called molded candle holders has the same benefits as bump candle and molded candle.

    Thickness systems for deep foundation implementation include deep foundations and kaisons. This system is used to build heavy structures such as bridge stands and oil rigs.

    Special Foundation
    Special foundations include floating foundations, cell and shell foundations, and steel or profile foundations.

    Floating foundations are used when deep layers are segregated or weak. Cellular and shell foundations are used based on the required function, the shape of the foundation, the hardness of the underground floors. Steel foundations or profiles are used to build structures that have high force output and are hard and rock based.

    Types of building foundations based on consumables

    Foundation reinforcement
    Reinforcement is one of the most important components in concrete buildings. Proper implementation of reinforcement is of great importance and sensitivity. Because in many cases the foundation resistance is provided by reinforcement. There are important points in performing the reinforcement that should be given special attention. For example, it should be noted that no rust or oil impregnated reinforcement should be used. Therefore, they should be examined before use.

    Reinforcement is divided into two categories: longitudinal or main reinforcement and transverse or bent reinforcement. Transverse reinforcements or hammocks are used to maintain longitudinal reinforcement. Their use also prevents bending of longitudinal reinforcement by pressure. Other notable considerations are the use of proper spacing. This should be a maximum of 1 cm. Failure to observe the proper distance may cause the concrete to fall.

    The longitudinal reinforcement is applied horizontally in two rows above and below the foundation. When performing longitudinal reinforcement, care must be taken to prevent rust and corrosion.

    Types of building foundations based on consumables

    Foundation Vault
    The base armature used to fasten the upper armature is known as the arch. Therefore, it can be said that the importance of using arches is to maintain the temporary stability of the upper reinforcement. The height and width of the pedestals, the width of the vault and their distance from each other should be determined based on the dimensions of the foundation and with regard to the amount of upper rebar force that supports the weight of the arch. In order to prevent the arches from getting out during concrete installation and when reinforcing them, their spacing must be properly selected.

    The stone foundation
    The stone foundation is made of various types of stone as its name implies. Natural stones are used to make this kind of foundation, but not every stone is suitable. The stone used for foundations must be healthy and have a smooth surface, as rough and circular stones make the building loose and unstable. The stone foundations have a wider surface than the wall on which they are made, using two types of mortar. If the load on the foundations is high, cement sand mortar is used but for low loads, mud and lime mortar are used. Affordable stones are readily available for foundry making and can be made easily. Stone foundations are used in single-storey structures and in the enclosure walls.

    Concrete foundation
    Concrete is one of the strongest and most durable building materials that can be used to build the foundation for structural stability. In fact, the best type of foundation are concrete foundations, so today the buildings are laid with reinforced concrete. Reinforced concrete is used in the construction of concrete and metal skeleton structures. This type of foundation is made of stairs, sloping and… and in order to increase its resistance against heavy loads, the concrete base is reinforced with steel bars in two directions. To make the concrete foundation, first cover the floor with concrete or low-concrete cement of 2 cm. In doing so, the soil and the main concrete are separated and the surface is leveled for concreting. Afterwards, the concrete is molded and poured into it, except inside the foundation. The concrete is shaken well and crushed. This action is continued until the concrete has fallen. Finally, after a day of loading on the wake. If using reinforced concrete, concrete should be inserted after the rebar is inserted into the mold.

    Metal wick
    Metallic foundations are used when the soil compressive strength is low and the loads are high. The steel foundations are mainly used for steel columns. The use of metal in the construction of foundations is not economically feasible, hence the rate of construction of reinforced concrete foundations is higher than in steel foundations in the construction industry. To fabricate the wedge with a steel grid, a trench is drilled to a depth of 1 to 2.5 meters, then the floor is regulated. After that, 2cm thick concrete is poured onto the trench and compacted. In addition, a 2 cm layer of low grade concrete is placed on the previous concrete. The steel beams are then spaced at a specified distance on this concrete layer and the gap between them is filled with concrete. The first row of steel beams can also be replaced when necessary. Finally, all parts are filled with concrete and the structure is laid on this foundation.

    You’re looking
    Shafta is a kind of dough made of sand, soil, water and lime. Shafting is one of the simplest types of foundations in construction, often for low-rise buildings made of brick. To perform a honeycomb run, the shaft is first trimmed and then smoothed to a surface of 1 to 2 cm and left for a day to absorb water. They are then crushed and compacted using a weight. This will continue until the desired height is reached.

    Brick foundation
    Bricks are used to build foundations if the building is small and the load on the foundations is low. To save the brick, the foundation can be made as a staircase, in which case the load is transferred to the ground at an angle of 2 degrees. Brick paving is about 1 to 4 cm larger than the wall width.

    01/02/2020 By smart dg land news arch
  • 7 of Iran’s tallest towers

    7 of Iran’s tallest towers

    Until two or three decades ago, less than ten or twelve floors were built, and any building that was taller was a tall tower and a skyscraper. But in the last two decades, with the advent of construction technology and modern materials and methods, we have been able to design and build more high-rise structures and witness high-rise buildings in most major cities in the country. Of course, Iran’s tallest towers are currently located in metropolises.
    Sensitive standards and standards must be adhered to in order for high-rise structures to be constructed securely. Investigations have been started on the type of soil where the maximum weight that it can withstand is established, as well as studying the faults and their hazards. The intensity and direction of the wind are also calculated especially at the highest point of the tower.

    On the other hand, as a commercial or residential tower generates a high population influx, access to the land on which the tower is to be built should also be considered. Each of these and other important issues affects the design, implementation and even the possibility of building a tower on the site in question.
    Unfortunately, in recent years, many commercial and residential towers have been built in large cities that have not met many standards and have turned them into a dangerous time bomb for earthquakes and fires. These buildings have also disrupted the texture of the area and even created access barriers for other residents.
    However, we can find tall structures in Iran that are better positioned and more principled. Below we introduce you to Iran’s tallest towers.

    Milad Tower
    Tehran Milad Tower is 435 meters high and the sixth tallest telecommunication tower in the world and one of the tallest Iranian towers built on a 62-hectare land. Milad is located in the northwest of Tehran and is accessible in three ways: Sheikh Fazlullah Nouri Highway, Hakim Highway and Hemmat Highway.
    Milad Tower, one of the tallest towers in Iran and in the world, has become one of the symbols of the Iranian capital as well as an important center for cultural and leisure events, making it a major tourist attraction. Of course, one of the main uses of this tower, like other high-rise structures in Iran and the world, is to meet Tehran’s telecommunications and television needs.
    The tower has an international convention center with 15 different venues, an open and closed viewing platform, a variety of restaurants, exhibition spaces, the Iranian Museum of Fame, Sky Dome, Dolphins Park, two movie theaters, etc. which make it a low-key center in the field of amusement and entertainment. It has become prosperous in Iran.
    One of the highlights of Milad’s tower design is the crown part, whose exterior is in harmony with traditional Iranian architecture and its engravings.
    Milad Tower construction began after several years of research in the month of January 76, and after 11 years of operation in October 87 was completed.
    Uses of the Milad Tower include:
    Meteorological and traffic control applications
    Creating and expanding access to wireless network
    Creating a tourist attraction

    Tehran International Tower
    It is the tallest residential building and one of Iran’s tallest towers, 162 meters high and built on 56 floors. The Tehran International Tower, designed with three wings and 220,000 square meters of infrastructure. This towering giant comprises 572 residential units, including triplex penthouses.
    Located between the Wise West, Kurdistan and Sheikh Bahai highways, the tower is within easy reach of any part of the city.
    The Tehran International Tower is designed and built according to modern standards and standards. Its designers and builders claim the building can withstand earthquakes measuring up to ten. Therefore, this huge building is Iran’s most earthquake-resistant residential tower.
    Each wing of the tower presents a different perspective of Tehran. Residents of the units have services such as energy management, internal computer network, CCTV, fire extinguisher, central TV antenna and elevator traffic control system.
    On the ground floor of the tower there are 17 commercial units that serve the welfare and comfort of its inhabitants. There are two dedicated tennis courts and full sports facilities. There are also thousands of indoor parking with concrete skeleton and retaining walls for the residents of the tower.
    Although high-rise construction in Iran has grown significantly in recent years, it remains one of the tallest towers in the country.

    7 of Iran's tallest towers

    Tabriz World Trade Center
    The building is 37 stories high and 157 meters high and was built in Valiasr town of Tabriz. This structure, which is one of the tallest towers in Iran, has a number of features and new features that we refer to in some respects:
    The first building is the Free Plan.
    The tallest commercial-service-tourism tower in the country.
    It is the first building in the country to be executed with a special ceramic paneled facade.
    Iran’s first high tower is equipped with earthquake-absorbing viscous dampers.
    It is the first tower built in the country with built-in R-PC technology.

    The Tabriz World Trade Center has three entrances, including the western entrance to Shariati Street next to Yas Park, the eastern entrance to Parvin Etesami Square to Safa Street and the southern entrance to Lida Street. The tower has 1,500 indoor parking units and many open parking spaces so that visitors do not get into trouble.
    The Tabriz World Trade Center tower has offices besides telecommunications, bank branches, offices of domestic and international companies, conference hall, turntable and more. The center opened in May 2006 and provides services to visitors.

    Middle East Swan Diamond Tower
    This controversial modern project was built in Motel Qu in Mazandaran Province and is in many ways outstanding. The complex has three towers, two of which are commercial-residential and the third tower is a luxurious 38-story hotel 150 meters high. Each of the residential towers is 21 storeys.
    The project was built with the financial support of Ahad Azimzadeh and has received international support from companies at every stage – from the preliminary studies to the final and final stages. For example, the lighting of the towers was done by the French company SSF.
    The Middle East Swan Diamond Project is a brilliant example of the science and art of modern architecture in the country that can compete internationally with similar projects.

    PAGE Commercial Complex in Mashhad
    The Paget Business Complex is also a classy city that fits in very well. The complex has about 130,000 square meters of infrastructure and is operational in five blocks and is one of the tallest towers in Iran. These blocks range from 6 to 25 floors and include many different uses.
    The business-administrative center of Paj is located at the beginning of Mashhad Boulevard in Mashhad and has good accessibility. The complex’s parking lot has a capacity of more than 750 vehicles, which can meet the needs of the customers.
    The Paget Business Complex includes office space, department stores, several restaurants, movie theaters, book cafes, banks, games and sports spaces, etc. that keep people satisfied with a variety of needs without having to leave the complex.

    Tehran White Tower
    The tower, which was opened in the Tehran Revolutionary Guards in 1379, was highly regarded in its time and is one of the tallest towers in Iran. The White Tower is 22 stories high and 134 meters high and houses Iran’s first spinning restaurant.
    The tower has office units and of course a luxurious hotel. The hotel’s rooms are comfortably located in the location where they are located and, after nearly two decades, they continue to retain their popularity among companies and travelers and even have long-standing customers.

    7 of Iran's tallest towers

    Tower of Heaven in Ormanyeh
    When the 37-storey tower was built in Tehran’s Fermanah area, it was named the tallest residential building in Iran. Today, with a height of 120 meters, after the Tehran International Tower, it occupies the second position in this table and is one of the tallest towers in Iran. Sky Tower has a total of 104 residential, commercial and office units. The headquarters of the Iranian Ship Organization is also located in the tower.

    Conclusion:
    In recent decades we have seen growth in the construction and implementation of high-rise buildings and towers in the country. A major factor in this growth has been the advancement of architectural science and technology, as well as the need to create more space by upgrading buildings.
    Most of these towers have commercial-recreational uses and a few are built solely for residential use.
    Most of the tall buildings in the country are located in big cities like Tehran, Mashhad and Tabriz.

    12/31/2019 By smart dg land news arch
  • Keep this in mind when choosing the right light for each room

    Keep this in mind when choosing the right light for each room

    According to research by scientists, eye diseases caused by exposure to very bright, cold and fluorescent lights have increased by 5%. Think about the room where you spend most of your time. Have you considered choosing the right light in each room when designing your home? Do you know how many lamps should be in the room? Do you know what kind of light comes in each room? How many lamps are there in your room?
    All of these should be taken into account when choosing the right light for every room and office. When choosing the right light you should pay attention to the location. Different lights have different effects on your eyes and some of them endanger your eye health.

    What kind of light should be avoided in choosing the right light?
    Fluorescent lamps, cold white and bright lights, and incandescent lamps produce the highest amount of ultraviolet light. According to research, most of the eye damage is caused by these lights, and it is best to keep this in mind when choosing the right light for different locations and the lighting of each room.
    In addition to these lights, mobile lights, tablets, blue lights and some types of LEDs are harmful to the eyes. Sunlight can also cause eye damage. What distinguishes these lights from the appropriate light selection list is their short wavelength of light.

    Lamps
    In the 19th century, the first incandescent lamp was invented by Thomas Edison. Since then, there has been considerable improvement in the different types of bulbs and their productivity. There are many different types of lamps available in different places and appliances such as lamps found in the lighting systems of homes, offices, factories, electrical appliances, and so on.
    The performance of a lamp depends on the type of bubble (glass or bulb). Different types of bulb bulbs cause different lights. Lamps produce light by electricity and are a form of artificial light. Lamps and lights play a vital role in the lighting system and help us create our own lighting.

    Here’s a look at the different types of lights and lamps, their features and performance. Understanding the types of lamps is important for saving energy and choosing the right lighting for each room and location, and this information will help you decide which lamps can be used depending on the environment in which the lighting is to be used. Provide adequate light to any room and location.

    Different types of lamps and lights
    Incandescent lamps
    Incandescent lamps are standard lamps that most people are quite familiar with. Incandescent lamps are manufactured in different sizes and voltages. These light bulbs produce light and heat by the electricity that passes through the tungsten filament (chromium metal) inside their bubble. The filament is in a mixture of nitrogen gas or vacuum.
    Over time, LED lamps, fluorescent lamps, and others have replaced these types of lamps and are less commonly used today. One of the reasons that reduced the use of this lamp is the sudden flow of light on the lamp. Due to the bubble being thin and the energy and heat generated by the lamp, it is possible to break the lamp as the filaments warm up.

    Compact fluorescent lamps
    Compact fluorescent lamps are a new type of fluorescent lamps that work just like the old fluorescent lamps. One of the problems with these lamps is mercury production and disposal problems. This lamp is designed as a replacement for incandescent lamps.
    These lamps use less energy, produce the same amount of light and last longer. The luminous efficiency of a compact fluorescent lamp is about 2 lumens per watt and lasts approximately 2 hours. Most of these tubes are manufactured in tubular form and their new models look like incandescent bulbs.

    Halogen lamps
    These bulbs include a tungsten filament with a dense, translucent coating, filled with static gas and a small amount of halogen (bromine or iodine). These lights are smaller than ordinary bulbs. Halogen extends the life and brightness of the lamp. The optical efficiency of a halogen lamp is about 2 lumens per watt.

    Moonlight bulbs
    Fluorescent lamps use less energy to produce light than incandescent lamps and have an efficiency of about 2 to 3 lumens per watt, but are more expensive than these lamps. Fluorescents do not have good color and have a cold appearance. So consider this when choosing the right light. This lamp can be used in many places, especially the outdoor environment. When using this lamp, it is best to combine it with another good light.

    Neon lights
    Neon lamps contain low-pressure gas and work with a glass bubble with two electrodes installed. Standard light bulbs are filled with a mixture of neon gas and argon, while light bulbs are filled with pure neon gas only. The gas in the bulb of this bulb causes the electrodes to transfer energy to each other and keep the bulb on.

    Keep this in mind when choosing the right light for each room

    HID lamps or high drain lamps
    These lamps produce a great deal of light and are not suitable for home use. They are used in outdoor lamps, stadiums, public areas, streets, roads and parking lots. Safety is very important in making these lamps.

    LED lamps
    This type of light bulb directs light through electrons in a semiconductor device. LED bulbs produce much more light than incandescent bulbs, while consuming much less energy and lasting longer. They basically put the LEDs in a bubble so that it can be used as a lamp. These lamps can produce different color lights without color filters. The cost of buying an LED is slightly higher than other lamps.
    Metal halide lamps
    The lamps have an arc-shaped duct made of ceramic or quartz, with mercury, MH salt and gas flowing through it. The light they produce is greater than their size, and they are very efficient. Most of these lamps are used in auditoriums, playgrounds and outdoor areas.

    Sodium low pressure lamps
    Sodium lamps work similar to fluorescent lamps and take a few seconds to illuminate. These light bulbs produce a great deal of light and are suitable for outdoor use, roads, etc.
    What lamps should you consider when choosing the right light?
    The first step in choosing the right light is choosing the right lamp. There are light sources that, in addition to being better for the eye, produce more energy. These lamps come in a variety of prices and applications, and finally, by exploring them and explaining their features, you can choose the right light.
    Solar Lamps (Warm Light Bulb)
    The first lamp you can put on your “Choose the right light” list is the solar lamp. These traditional lamps produce warmer light and emit less UV radiation than white light bulbs. The only problem with these lamps is their high energy consumption and cost, but one of the best options is choosing the right light.

    Full spectrum lamps
    The term optical spectrum does not refer to a particular type of lamp, but rather to a criterion for the health of some lamps. These types of light bulbs simulate natural light and balance the brightness and contrast of the light bulb. The makers of these lamps believe that the light of these lamps enhances readability, color perception and mood.

    LED lamps
    You can also use LED lamps to choose the right light! These bulbs are more expensive than other bulbs but are very energy efficient. These lamps do not produce any UV rays. There are many misconceptions about these lamps.
    For example, many people believe that these lamps can only produce cold and blue light, while LED lamps have a color spectrum and produce warm light. Another misconception is that many people think that the amount of energy saved by these lamps is too low. But studies show that the energy consumption of these lamps is about half the energy consumption of incandescent and fluorescent lamps.

    Compact fluorescent lamps or CLFs
    In addition to producing low UV rays, these lamps emit more light than the conventional incandescent and fluorescent lamps. Their light is lower than the LED bulbs, but they are less expensive than the bulbs. One of the drawbacks of this type of lamp is the mercury that it produces, but it is much less than the mercury produced by conventional fluorescent lamps.
    Introduced lamps show the least amount of damage and you can use them to select the right lighting for your room.

    Choose the right lighting and use of each room
    The choice of appropriate lighting should be taken into account in each location and the amount of light in each room should be chosen according to its application. Generally, lighting is divided into three models: ambient lighting, working lighting, accent lighting.
    Ambient or general lighting is the amount of light used to light a room. In addition to the usual use of natural light in a room, this lighting tries to make the room brighter. Chandeliers, bulbs, wall lamps, etc. can be used for this purpose.
    Using lighting will allow you to have more light than the natural light in space. So by focusing the lamps and lights on different locations, you try to create optical contrast. Desktop lights, study lights, and cabinets and cabinets are the most common types of lighting. Other lamps can be used for this lighting, but the type and style of these lamps, the way they are used in the environment, and the amount of light they use are effective.
    Accent lighting illuminates a particular environment. This type of lighting is mainly used to focus light on an artwork. This way the light is focused on the effect and the surrounding effect should be darker and create a shadow around it.

    To choose the right light and use these techniques, you need to consider what you use in one room and then use different techniques. It is best to start with ambient lighting and then work lighting and then acce lighting.

    12/29/2019 By smart dg land Interior design
  • What do you know about urban law?

    What do you know about urban law?

    In today’s world, cities are the most important center of human communities and are at the heart of human life. Increasing population growth has led to urban development, and governments are building urban laws to regulate urban living. Urbanization is a set of measures and methods used by urban experts to make cities better and run. According to this definition, urban planning laws are a set of laws that can best manage and plan cities. One of the most important issues in urban planning is land and property management. In this article we will briefly outline some of the important rules in this area.

    Green Space Laws in Urban Laws
    The importance of green spaces in urban architecture is not hidden from anyone. Urban planners pay as much attention to the design of highways and towers as they do to the green space and its proper distribution in the urban space. Urban green spaces are divided into three categories: public green space for use by all people, such as parks and forests, semi-public green space defined for use by government agencies, hospitals, etc., and street green space covered by vegetation. The level of the streets and boulevards and the margins of the highways. According to Article 14, paragraph 1, green space and park regulations only certain complexes and centers with specific uses are allowed to be defined in the green space.
    These include: library and bookstore, cultural and social places, restaurant and printing house and the like, office building and park guard, greenhouse, building of technical facilities, museum, exhibition, mosque, sanitary facilities, children’s amusement spaces, sports spaces. Children’s theater and cinema and art studios. Also, according to Article 17 of this law, parking in the area around the parks can only be used by the users of these centers. Article 18 of this law also prohibits the construction of any fence or wall around public green spaces.
    Regulations on Sima and Urban Landscape in Urban Planning Laws
    The Supreme Council of Urban Planning and Architecture of Iran passed a law in 2008 focusing on the refurbishment and clearing of city views and walls, as well as the organization of passages and sidewalks, which emphasized the need for urban planning. By law, the urban landscape is all natural or artificial elements such as buildings, vegetation, and urban furniture that are visible to everyone in public areas such as streets, squares, and public places.
    Paragraph 1 of Article 3 of this law emphasizes the correct selection of building materials and permits those materials for construction operations that do not cause environmental pollution. It is also stated in another part of the article that all boards related to urban activities such as clinics, cultural centers, business centers, organs, etc. should be provided in a coordinated manner (in terms of form, layout and location) for the different classes. According to the law, since the corners, gates, and facades of buildings located in these areas are more important than other locations, their architecture must be approved by a committee comprised of experts known as the Simplification and Urban Landscape Committee. The law enacts that forbidding the body of buildings such as balconies, terraces, etc. is prohibited in urban spaces, and the construction of semi-open spaces is done by retreating the exterior walls in the ground. Adoption of this law has been done to complement the laws of urban planning with the aim of revitalizing the country’s rich architectural and urban culture of the past and preventing visual and functional mismatches in urban spaces and activities.

    Construction Certification Laws in Urban Planning
    According to the suggestion of the Office of Administrative Affairs and Employment, the Supreme Administrative Council passed a law in 2011 that permits the issuance of building certificates such as construction licenses, building completion certificates and certificates of non-infringement in municipalities across the country. According to the law, municipalities are required to visit the property in question at least seven days after the applicant has applied for a construction permit and to obtain the necessary documents, and to determine its status after completing relevant reports. According to the law, the time required for the certificate of non-infringement and the completion of the work is two days, during which time the relevant certificates must be issued;
    It also states that all government agencies are required to report to municipalities at the end of each year in the form of reports to be reflected in urban plans. According to the law, which is one of the most important laws of urban planning, urban maps must be updated at the beginning of each year and the status of urban divisions should be precisely specified.

  • Safety and Health of Building Materials and Products

    Safety and Health of Building Materials and Products

    Perhaps one of the aspects that is often overlooked or less overlooked in the design of a structure is the choice of materials and construction products. The importance of choosing the right construction products is very important and this plays an important role in the success or failure of a building. Even the use of standard building products has a significant impact on home prices, and each of us has probably heard about the quality of our housing and its price at least once when buying a home or mortgage and renting it.
    In our country, the Ministry of Roads and Urban Development has enacted the technical and engineering aspects of building and national regulations governing the technical and engineering aspects of building, and compliance with these rules is essential for all construction activists.
    Although these regulations are presented in various categories such as the standards defined for each material, its specifications and technical specifications, its compatibility with the building and its type of packaging and maintenance, we present in this article from the Keyboard Journal to Materials Safety and Considerations Environmental Some of the building products used in building a building are:
    A few items of construction products
    Generally, for the construction of a structure, the technical specifications of construction products must be standardized and materials that have quality certification must be used.
    Hydraulic Cement
    This type of cement is very sticky and hardens in combination with water or its proximity (also air). Thus, by definition, hydraulic cement is waterproof and does not perish in the face of water.

    Materials safety and environmental considerations of hydraulic cement
    This type of cement contains a small amount of live lime and other alkaline oxides, so it can be harmful to the skin and eyes, and dust in the air can cause respiratory problems. Therefore, cement should not be dispersed in the air.
    When using cement, people need to wear gloves, glasses, masks, and long sleeves to prevent it from impacting different parts of the face and body.

    If the cement comes in contact with damp skin or eyes, it should be washed off with plenty of clean water as soon as possible. In case of prolonged exposure to cement, it is advisable to use dilute vinegar solution to wash the skin after the area has been rinsed.
    Plaster and its products
    Plaster is a building adhesive that is white in color, if pure. If gypsum is cooked at low temperature and in laboratory conditions, gypsum is obtained.
    Material Safety and Environmental Considerations of Building Plaster
    In structures that use building plaster, workers also use shoes, protective boots, gloves, masks and safety clothing. Also, be careful when loading the construction plaster so that the envelopes are not torn and dust is not created.

    Building plaster compatibility with other materials
    Building plaster products, especially in wet areas, should be covered with stainless steel if exposed to steel.
    Building plaster and its products in related areas, such as the northern cities of the country, should not be directly adjacent to concrete or cement products.
    Construction mortars
    Generally, a paste that is created by mixing adhesive and filler is called fresh mortar. This adhesive can be cement paste and the filling material can be like fine aggregates.

    Mortar is used in construction to glue building materials together. Mortar provides the necessary bedding for plastering, plastering and bonding.
    Materials safety and environmental considerations of building mortars
    Since lime mortar is often used in construction, hydrated lime is best used, and due to lime damage to the skin and eyes, it is necessary to consider the safety of materials and individuals and to avoid lime contact with the working skin. Prevent action.
    Compatibility
    Lime, due to its composition of ingredients, causes corrosion of metals such as lead, aluminum and zinc. For this reason, it is necessary to coat metal materials with appropriate materials before placing them in limestone mortar.
    Building stones
    Stones are one of the most commonly used materials in construction. Sometimes stones are used as blocks and sometimes cut to decorate the floor and floor.

    Natural stone consists of one or more minerals and is a synthetic stone made from a mixture of aggregates, adhesives and additives.
    Materials safety and environmental considerations of masonry stone
    Cutting stones should be done indoors using water.
    The use of stones in buildings should never endanger the health and health of people and the environment. If it is likely that harmful radiation is emitted from the stone, it is necessary to examine and test the stone.
    Stones are compatible with all construction products.
    Ceramic tile
    This product is used for floor and wall covering and decorative items. Ceramic tile is manufactured with different properties and systems and is a combination of different minerals.
    Materials Safety and Environmental Ceramic Tile
    Glazed tiles contain some compounds such as lead oxide and cadmium that are harmful to the environment.
    Warehousing and painting of tiles should include safety helmets, work shoes and boots, and staff should be provided with personal protective equipment.

    Like stone, tiles are no longer incompatible with other building products.
    Bitumen
    Bitumen

  • North or South buildings – Conclusion

    North or South buildings – Conclusion

    Conclusion:
    As we said above, when buying a residential unit, first look at the building plan then the units in the building.
    Of course, do not let this precision make you obsessive in your choice.
    If the building you selected had the benefits of cooling heating and good business, you could give Atta a break and buy the unit.
    There are many factors to consider when buying a home. This article refers to the building map.
    Buildings are usually either south or north. Of course, there are also North-South, East and West.
    The north building is a building that enters the yard when it enters and then the building is placed behind the yard.
    These types of buildings usually have two units per floor.
    The most important factors to consider in a home are security and the amount of light received. These types of buildings have light from the kitchen and reception area for most of the day.
    Another type of building is the South Building. The south building is called the building that originally housed the building
    And behind the yard. These buildings are very beautiful and efficient in terms of building map.
    There are more parking spaces in this type of building than the north building.
    The south house receives sunlight from both the back and front of the house and is priced higher.
    As we explained before, the issue of skylights is important only in metropolitan areas because the building density is very high and the houses are located next to each other, each receiving different light. But in small towns where building congestion is less, the light is distributed almost equally to all homes and receives the same light.
    Houses in the south building have large windows with a high percentage of light. Now this case in the northern houses only includes units known as the northern unit

1 5 6 7 8 9 10 11 24
Archives
Previous Next
Close
Test Caption
Test Description goes like this